Synergy Audio WFO3.1D 3,500 Watt Monoblock Amplifier
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Synergy Audio WFO3.1D 3,500 Watt Monoblock Amplifier

Available: In Stock
$879.99 $899.99
Image

The Synergy Audio WFO 3.1D of world class amplifiers feature high end design, engineering and manufacturing, utilizing the best quality components to insure the best possible performance.

The WFO series of monoblock amplifiers are at home in a daily driven vehicle, all out daily ground pounding demo driver or in the SPL competition lanes.

Our Class AB multi-channel amplifiers feature high end Japanese Sanken output devices to insure audiophile sound quality with the versatility of 2 way active crossover controls.

Synergy Audio WFO 3.1D Specs:

  • Power @ 1 Ohm: 3500w @ 14.4v
  • Power @ 2 Ohm: 2350w @ 14.4v
  • Power @ 4 Ohm: 1200w @ 14.4v
  • Power @ 1 Ohm: 4685w @ 16v
  • Frequency Response: 12hz – 250hz
  • Signal to Noise Ratio: >100db
  • Damping Factor: >200
  • Subsonic Filter: 10hz – 50hz
  • Low Pass Filter: 35hz – 250hz
  • (2) 0 GA Power & Ground Terminals
  • 16v Working Voltage
  • 4 Power Transformers
  • Heavy Duty 2oz printed circut board
  • Size: 480mm W x 210mm W x 62mm H

All WFO series amplifier feature:

  • Custom high mass, thermally optimized aluminum heat sink casing
  • Overbuilt power supplies and output sections utilizing high grade components
  • Heavy duty double sided through hole PCB’s with thick solid copper heavy duty traces
  • Hand soldered nickel plated Tiffany RCA inputs/outputs
  • Single 1/0 and 4 gauge nickel plated power and ground inputs
  • Nickel plated 8 gauge speaker outputs
  • Fully linkable/strappable (Mono-block)
  • Input sensitivity 8V – 200mV
  • Variable Phase Shift 0°- 180°
  • +18db Remote Gain control
  • Multi-way fully intelligent circuitry for maximum protection

The Synergy Audio WFO 3.1D of world class amplifiers feature high end design, engineering and manufacturing, utilizing the best quality components to insure the best possible performance.

The WFO series of monoblock amplifiers are at home in a daily driven vehicle, all out daily ground pounding demo driver or in the SPL competition lanes.

Our Class AB multi-channel amplifiers feature high end Japanese Sanken output devices to insure audiophile sound quality with the versatility of 2 way active crossover controls.

Synergy Audio WFO 3.1D Specs:

  • Power @ 1 Ohm: 3500w @ 14.4v
  • Power @ 2 Ohm: 2350w @ 14.4v
  • Power @ 4 Ohm: 1200w @ 14.4v
  • Power @ 1 Ohm: 4685w @ 16v
  • Frequency Response: 12hz – 250hz
  • Signal to Noise Ratio: >100db
  • Damping Factor: >200
  • Subsonic Filter: 10hz – 50hz
  • Low Pass Filter: 35hz – 250hz
  • (2) 0 GA Power & Ground Terminals
  • 16v Working Voltage
  • 4 Power Transformers
  • Heavy Duty 2oz printed circut board
  • Size: 480mm W x 210mm W x 62mm H

All WFO series amplifier feature:

  • Custom high mass, thermally optimized aluminum heat sink casing
  • Overbuilt power supplies and output sections utilizing high grade components
  • Heavy duty double sided through hole PCB’s with thick solid copper heavy duty traces
  • Hand soldered nickel plated Tiffany RCA inputs/outputs
  • Single 1/0 and 4 gauge nickel plated power and ground inputs
  • Nickel plated 8 gauge speaker outputs
  • Fully linkable/strappable (Mono-block)
  • Input sensitivity 8V – 200mV
  • Variable Phase Shift 0°- 180°
  • +18db Remote Gain control
  • Multi-way fully intelligent circuitry for maximum protection

Categories
  • G2 DYNAMICS
  • SPARKED INNOVATIONS
  • STEVE MEADE DESIGNS
  • TERMLAB/TERMPRO
  • D'AMORE ENGINEERING
  • BLOG
  • Free Delivery
    From $50
  • 99% Customers
    Feedbacks
  • 14 Days
    Return Policy
  • Payment
    Secure System
  • Only Best
    Brands