Synergy Audio WFO15.2D 2-Channel Amplifier
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Synergy Audio WFO15.2D 2-Channel Amplifier

Add Your Review
Available: In Stock
  • Product SKU: G2D1705E-1
$549.99 $599.99

Image

Synergy Mobile Audio is at it again with a new addition to the WFO line of powerhouse amplifiers with the all new WFO15.2D.  A 2 Channel beast, this Korean built monster is stable down to 1 ohm in stereo mode and 2 ohms bridged, a hard to find feature in most 2 channel amplifiers nowadays!  We'll let all the YouTube amp tests tell how much power it really doles out, but for now, 1,500 watts RMS per channel at 1 ohm per channel is disastrously insane.

WFO 15.2D Specs: 

  • Power @ 4 Ohm: 650 x 2 @ 14.4v
  • Power @ 2 Ohm: 1,060 x 2 @ 14.4v
  • Power @ 1 Ohm: 1,500w x 2 @ 14.4v
  • Power @ 4 ohm Bridged: 2,130W x 1 
  • Power @ 2 Ohm Bridged: 2,920W x 1 @ 14.4v
  • Frequency Response: 10hz – 38khz
  • Signal to Noise Ratio: >100db
  • Dampening Factor: 300 >
  • Low Pass Filter: (X1, X10)
    • Channels 1/2 – 50hz (500)hz – 800hz(8K)
  • High Pass Filter:
    • Channels 1/2 – 20(200)hz – 800hz(8K)
  • Operating Voltage: DC 8V-16V
  • Input sensitivity: 8V – 0.2V
  • Fuse Rating: 250A
  • Dimensions: 350mm L x 239mm W x 68.5mm H
  • 0 gauge power and ground inputs
  • 8 gauge speaker outputs
  • Panel locking Tiffany RCA input and output connections

 

 

Synergy Mobile Audio is at it again with a new addition to the WFO line of powerhouse amplifiers with the all new WFO15.2D.  A 2 Channel beast, this Korean built monster is stable down to 1 ohm in stereo mode and 2 ohms bridged, a hard to find feature in most 2 channel amplifiers nowadays!  We'll let all the YouTube amp tests tell how much power it really doles out, but for now, 1,500 watts RMS per channel at 1 ohm per channel is disastrously insane.

WFO 15.2D Specs: 

  • Power @ 4 Ohm: 650 x 2 @ 14.4v
  • Power @ 2 Ohm: 1,060 x 2 @ 14.4v
  • Power @ 1 Ohm: 1,500w x 2 @ 14.4v
  • Power @ 4 ohm Bridged: 2,130W x 1 
  • Power @ 2 Ohm Bridged: 2,920W x 1 @ 14.4v
  • Frequency Response: 10hz – 38khz
  • Signal to Noise Ratio: >100db
  • Dampening Factor: 300 >
  • Low Pass Filter: (X1, X10)
    • Channels 1/2 – 50hz (500)hz – 800hz(8K)
  • High Pass Filter:
    • Channels 1/2 – 20(200)hz – 800hz(8K)
  • Operating Voltage: DC 8V-16V
  • Input sensitivity: 8V – 0.2V
  • Fuse Rating: 250A
  • Dimensions: 350mm L x 239mm W x 68.5mm H
  • 0 gauge power and ground inputs
  • 8 gauge speaker outputs
  • Panel locking Tiffany RCA input and output connections