DS18 EXL-P2000X1D – 1 Channel Class D Car Amplifier – RMS Power @ 1 Ohm 2000W x 1CH – Made in Korea
- Product SKU: G2D3797E
DESCRIPTION
The EXL-P series Amplifiers are made from the ground up to be your best choice for pure and uninterrupted power for your audio system. The optimized Korean circuitry is made of the highest-grade components available to produce massive power levels for your Subwoofers, Midranges, or Tweeters. The sleek design is made with a very strong heatsink casing and thermal protection circuitry that maintains amp temperature to well below thermal limits giving you extended longevity and high efficiency. The included bass knob along with the precise filters on the amplifier will help you tune the signal to the perfect frequencies you desire effortlessly. The EXL-P2000X1 D Class Monoblock amplifier is conservatively rated at 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.
Highlights
The EXL-P2000X1D Class D Monoblock amplifier 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.
High Quality Korean components and optimized circuitry help attain massive power levels at maximum efficiency giving louder and deeper bass.
Our precise filters will help you adjust to your desired frequencies or box tuning easily. Low Pass filter: 35hz-250hz / Subsonic filter: 10hz-30hz / 0–180-degree phase / Bass boost: 0-9 DB.
The included Bass knob will let you adjust your bass as you drive easily with the turn of your fingertips which also includes power and clipping indicator so you can monitor your signal and amplifier status.
Includes a wide voltage operational range of 9-15.5 volts with gain sensitivity adjustable from 200mv to 6v through the high-quality tiffany RCA jacks.
Large power and ground 1/0 inputs with 8-gauge speaker input terminals. We recommend a 250 inline fuse for this amplifier for optimal operation.
| RMS Power @ 4 Ohm | 800W x 1CH |
| RMS Power @ 2 Ohm | 1400W x 1CH |
| RMS Power @ 1 Ohm | 2000W x 1CH |
| Frequency Response | 15Hz-250Hz |
| Signal/Noise Ratio | >98dB |
| Efficiency@4 0hm | >87% |
| Damping Factor | 200 |
| THD % | <0.02% |
| Low Level Input Range | 200MV-6V |
| Selectable X-Over | LPF Fixed |
| X-Over Filter Range | 35Hz - 250Hz |
| Bass Boost Range | 0-+9dB |
| Bass Boost Frequency | 30Hz - 60Hz |
| Infrasonic Filter | 10Hz - 30Hz |
| Phase Selector | 0-180 |
| Class | D (Digital) |
| Amplifier Type | Monoblock Subwoofer |
| Channels | 1CH |
| Minimum Impedance | 1 Ohm |
| Led Indicator | PWR / CLIP / PROTECT |
| Power Input Size | 0 AWG |
| Fuse Rating | 250A |
| Remote Level Control | Yes - Dash Mount |
| Cooling Fan | No |
| Thermal Protection | Yes >75°C / 167°F |
| Over-Load Protection | Yes |
| Dc Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes >15.5V |
| Clipping Protection | Yes |
| Body Color / Finish | Black Aluminum |
| Dimensions LxWxH (Inches)(mm) | 12.67 x 8.77 x 2.67” / 322 x 223 x 68 mm |
| Heatsink Length | 11" / 280mm |
DESCRIPTION
The EXL-P series Amplifiers are made from the ground up to be your best choice for pure and uninterrupted power for your audio system. The optimized Korean circuitry is made of the highest-grade components available to produce massive power levels for your Subwoofers, Midranges, or Tweeters. The sleek design is made with a very strong heatsink casing and thermal protection circuitry that maintains amp temperature to well below thermal limits giving you extended longevity and high efficiency. The included bass knob along with the precise filters on the amplifier will help you tune the signal to the perfect frequencies you desire effortlessly. The EXL-P2000X1 D Class Monoblock amplifier is conservatively rated at 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.
Highlights
The EXL-P2000X1D Class D Monoblock amplifier 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.
High Quality Korean components and optimized circuitry help attain massive power levels at maximum efficiency giving louder and deeper bass.
Our precise filters will help you adjust to your desired frequencies or box tuning easily. Low Pass filter: 35hz-250hz / Subsonic filter: 10hz-30hz / 0–180-degree phase / Bass boost: 0-9 DB.
The included Bass knob will let you adjust your bass as you drive easily with the turn of your fingertips which also includes power and clipping indicator so you can monitor your signal and amplifier status.
Includes a wide voltage operational range of 9-15.5 volts with gain sensitivity adjustable from 200mv to 6v through the high-quality tiffany RCA jacks.
Large power and ground 1/0 inputs with 8-gauge speaker input terminals. We recommend a 250 inline fuse for this amplifier for optimal operation.
| RMS Power @ 4 Ohm | 800W x 1CH |
| RMS Power @ 2 Ohm | 1400W x 1CH |
| RMS Power @ 1 Ohm | 2000W x 1CH |
| Frequency Response | 15Hz-250Hz |
| Signal/Noise Ratio | >98dB |
| Efficiency@4 0hm | >87% |
| Damping Factor | 200 |
| THD % | <0.02% |
| Low Level Input Range | 200MV-6V |
| Selectable X-Over | LPF Fixed |
| X-Over Filter Range | 35Hz - 250Hz |
| Bass Boost Range | 0-+9dB |
| Bass Boost Frequency | 30Hz - 60Hz |
| Infrasonic Filter | 10Hz - 30Hz |
| Phase Selector | 0-180 |
| Class | D (Digital) |
| Amplifier Type | Monoblock Subwoofer |
| Channels | 1CH |
| Minimum Impedance | 1 Ohm |
| Led Indicator | PWR / CLIP / PROTECT |
| Power Input Size | 0 AWG |
| Fuse Rating | 250A |
| Remote Level Control | Yes - Dash Mount |
| Cooling Fan | No |
| Thermal Protection | Yes >75°C / 167°F |
| Over-Load Protection | Yes |
| Dc Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes >15.5V |
| Clipping Protection | Yes |
| Body Color / Finish | Black Aluminum |
| Dimensions LxWxH (Inches)(mm) | 12.67 x 8.77 x 2.67” / 322 x 223 x 68 mm |
| Heatsink Length | 11" / 280mm |
