DC AUDIO "PITBULL" 20K - 20,000W RMS AMPLIFIER
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

DC AUDIO "PITBULL" 20K - 20,000W RMS AMPLIFIER

Add Your Review
Available: In Stock
  • Product SKU: G2D3692E
$3,499.99 $3,599.99
Snap Logo Lease for as low as $/week Learn More
Image

The DC AUDIO 20.0kw PITBULL competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped for 40,000 watts of power.

It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.

  Features Voltage 20.0kw
Output Power (RMS) 4 ohm 14.4V 6,000Wx1
  2 ohm 14.4V 11,000x1
  1 ohm 14.4V 20,000Wx1
  1 ohm 16V N/A
  1 ohm 18V N/A
Input Sensitivity 6V~0.2V    
Low Pass Filter Switchable    
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable    
( @ 24 dB Slope) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response   Hz 15-270
Signal to Noise Ratio   dB 100
Damping factor     150<
Efficiency @ 4ohm   % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 2,000 Amps
Linked Fuse Rating 4,000 Amps
Indicator Power   Yes
  Protection   Yes
  Clip   No
Speaker & Power terminal Mold Type   Yes
  Power Gauge 0Ga x 3
Heatsink Length 39.5" 
Heatsink Length 11.5" (292mm)
Heatsink Length 2.6" (66mm)

The DC AUDIO 20.0kw PITBULL competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped for 40,000 watts of power.

It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.

  Features Voltage 20.0kw
Output Power (RMS) 4 ohm 14.4V 6,000Wx1
  2 ohm 14.4V 11,000x1
  1 ohm 14.4V 20,000Wx1
  1 ohm 16V N/A
  1 ohm 18V N/A
Input Sensitivity 6V~0.2V    
Low Pass Filter Switchable    
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable    
( @ 24 dB Slope) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response   Hz 15-270
Signal to Noise Ratio   dB 100
Damping factor     150<
Efficiency @ 4ohm   % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 2,000 Amps
Linked Fuse Rating 4,000 Amps
Indicator Power   Yes
  Protection   Yes
  Clip   No
Speaker & Power terminal Mold Type   Yes
  Power Gauge 0Ga x 3
Heatsink Length 39.5" 
Heatsink Length 11.5" (292mm)
Heatsink Length 2.6" (66mm)

The DC AUDIO 20.0kw PITBULL competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped for 40,000 watts of power.

It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.
  Features Voltage 20.0kw
Output Power (RMS) 4 ohm 14.4V 6,000Wx1
  2 ohm 14.4V 11,000x1
  1 ohm 14.4V 20,000Wx1
  1 ohm 16V N/A
  1 ohm 18V N/A
Input Sensitivity 6V~0.2V    
Low Pass Filter Switchable    
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable    
( @ 24 dB Slope) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response   Hz 15-270
Signal to Noise Ratio   dB 100
Damping factor     150<
Efficiency @ 4ohm   % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 2,000 Amps
Linked Fuse Rating 4,000 Amps
Indicator Power   Yes
  Protection   Yes
  Clip   No
Speaker & Power terminal Mold Type   Yes
  Power Gauge 0Ga x 3
Heatsink Length 39.5" 
Heatsink Length 11.5" (292mm)
Heatsink Length 2.6" (66mm)

The DC AUDIO 20.0kw PITBULL competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped for 40,000 watts of power.

It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.
  Features Voltage 20.0kw
Output Power (RMS) 4 ohm 14.4V 6,000Wx1
  2 ohm 14.4V 11,000x1
  1 ohm 14.4V 20,000Wx1
  1 ohm 16V N/A
  1 ohm 18V N/A
Input Sensitivity 6V~0.2V    
Low Pass Filter Switchable    
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable    
( @ 24 dB Slope) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response   Hz 15-270
Signal to Noise Ratio   dB 100
Damping factor     150<
Efficiency @ 4ohm   % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 2,000 Amps
Linked Fuse Rating 4,000 Amps
Indicator Power   Yes
  Protection   Yes
  Clip   No
Speaker & Power terminal Mold Type   Yes
  Power Gauge 0Ga x 3
Heatsink Length 39.5" 
Heatsink Length 11.5" (292mm)
Heatsink Length 2.6" (66mm)