DC Audio Level 2 10" Subwoofer
- Product SKU: G2D3612E
Subwoofer Description
With more power handling than before, the Level 2 is back and better than ever!
This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.
It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.
This sub works great in sealed or ported enclosures and definitely gives you more bang for your buck! Made with high quality parts and hand built in the USA.
Key Features
• Extremely rigid non-pressed paper cone assembly
• Multilayered polymer wide roll foam surround
• Polypropylene dust cover with DC logo
• Dual 8" OD flat linear roll spiders
• Heavy duty interweaved tinsel lead wire sewn to the spider
• Cast aluminum black frame / no invert mount
• FEA analyzed and optimized motor assembly - Fully CNC machined
• Rubber mounting gasket
• Chrome spring loaded push terminals
• 2.5” Hi-temp copper voice coil wound on black anodized voice coil former
• Rubber magnet cover
T/S Parameters
Sub Size 10"
Mounting Depth 5.5"
Mounting Hole Diameter 9.35"
Outside Driver Diameter 11"
Weight 18lbs
Magnet Material Ferrite
VC Diameter 2.5"
Displacement .12³ ft
Power Handling RMS/Peak 600/1200
Impedance (Ohm) D2/D4
Sd 324cm²
Vas 13.89L
Cms 0.095 mm/N
Mms 210 g
Fs 35.6 Hz
BL 24 N/A
Re 7.2 Ohm
Le 7mH
Qms 8.96
Qes 0.592
Qts 0.555
Xmax 22mm
Ref SPL @ 1 watt 82.1
Suggested Sealed .5³ ft
Suggested Ported 1.0³ ft
Subwoofer Description
With more power handling than before, the Level 2 is back and better than ever!
This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.
It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.
This sub works great in sealed or ported enclosures and definitely gives you more bang for your buck! Made with high quality parts and hand built in the USA.
Key Features
• Extremely rigid non-pressed paper cone assembly
• Multilayered polymer wide roll foam surround
• Polypropylene dust cover with DC logo
• Dual 8" OD flat linear roll spiders
• Heavy duty interweaved tinsel lead wire sewn to the spider
• Cast aluminum black frame / no invert mount
• FEA analyzed and optimized motor assembly - Fully CNC machined
• Rubber mounting gasket
• Chrome spring loaded push terminals
• 2.5” Hi-temp copper voice coil wound on black anodized voice coil former
• Rubber magnet cover
T/S Parameters
Sub Size 10"
Mounting Depth 5.5"
Mounting Hole Diameter 9.35"
Outside Driver Diameter 11"
Weight 18lbs
Magnet Material Ferrite
VC Diameter 2.5"
Displacement .12³ ft
Power Handling RMS/Peak 600/1200
Impedance (Ohm) D2/D4
Sd 324cm²
Vas 13.89L
Cms 0.095 mm/N
Mms 210 g
Fs 35.6 Hz
BL 24 N/A
Re 7.2 Ohm
Le 7mH
Qms 8.96
Qes 0.592
Qts 0.555
Xmax 22mm
Ref SPL @ 1 watt 82.1
Suggested Sealed .5³ ft
Suggested Ported 1.0³ ft
