DB DRIVE G7 2500.1 2,500 WATT MONOBLOCK AMPLIFIER
DB DRIVE G7 2500.1 2,500 WATT MONOBLOCK AMPLIFIER
Available:
In Stock
$699.99
$799.99
ectors
- ACT – Adaptive Crossover Technology
- High efficiency Class D Technology
- Direct Connect Speaker Terminals
- Dual 0 Gauge Power Wire Inputs
- APC – Audio Protection Circuit
- SESI – Signal Evaluation Status Indicator
- Bass Remote with status indicator
- CHM – Collective Heat Management
- DRIVE-LINK- for easy multi-linking of two like amplifiers
| Length (A) | 9.44in (240mm) |
| Width (B) | 9.13 in (232mm) |
| Height (C) | 2.53 in (64.5mm) |
| GENERAL SPECIFICATIONS | |
|---|---|
| Rated Power @ 14.4 Volts | |
| 1 x 2500 Watts @ 1Ω | |
| 1 x 1250 Watts @ 2Ω | |
| 1 x 625 Watts @ 4Ω |
| SPECIFICATIONS | |
|---|---|
| Working Voltage | 9-16 Volts |
| Frequency Response | 14Hz – 267Hz |
| Signal to Noise Ratio | <99dB |
| Damping Factor | 410dB< |
| Low Level Input | 6V – 0.2V |
| Subsonic Filter | 10Hz – 50Hz |
| Bass Boost | 0-dB – 12dB |
| Low Pass Filter Variable | 35Hz – 250Hz |
| Minimum Working Impedance | 1 O |
ectors
- ACT – Adaptive Crossover Technology
- High efficiency Class D Technology
- Direct Connect Speaker Terminals
- Dual 0 Gauge Power Wire Inputs
- APC – Audio Protection Circuit
- SESI – Signal Evaluation Status Indicator
- Bass Remote with status indicator
- CHM – Collective Heat Management
- DRIVE-LINK- for easy multi-linking of two like amplifiers
| Length (A) | 9.44in (240mm) |
| Width (B) | 9.13 in (232mm) |
| Height (C) | 2.53 in (64.5mm) |
| GENERAL SPECIFICATIONS | |
|---|---|
| Rated Power @ 14.4 Volts | |
| 1 x 2500 Watts @ 1Ω | |
| 1 x 1250 Watts @ 2Ω | |
| 1 x 625 Watts @ 4Ω |
| SPECIFICATIONS | |
|---|---|
| Working Voltage | 9-16 Volts |
| Frequency Response | 14Hz – 267Hz |
| Signal to Noise Ratio | <99dB |
| Damping Factor | 410dB< |
| Low Level Input | 6V – 0.2V |
| Subsonic Filter | 10Hz – 50Hz |
| Bass Boost | 0-dB – 12dB |
| Low Pass Filter Variable | 35Hz – 250Hz |
| Minimum Working Impedance | 1 O |
