DB DRIVE G7 150.4 4-CHANNEL AMPLIFIER
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

DB DRIVE G7 150.4 4-CHANNEL AMPLIFIER

Add Your Review
Available: In Stock
$449.99 $499.99

Image
  • ACT – Adaptive Crossover Technology
  • High efficiency Class D Technology
  • Direct Connect Speaker Terminals
  • Dual 0 Gauge Power Wire Inputs
  • APC – Audio Protection Circuit
  • SESI – Signal Evaluation Status Indicator
  • Bass Remote with status indicator
  • CHM – Collective Heat Management
  • DRIVE-LINK- for easy multi-linking of two like amplifiers


Length (A) 17.87 in (200mm)
Width (B) 9.13 in (232mm)
Height (C) 2.53 in (64.5mm)

 

GENERAL SPECIFICATIONS
Rated Power @ 14.4 Volts
4 x 125 Watts @ 4Ω
4 x 250 Watts @ 2Ω
2 x 500 Watts @ 4Ω Bridged

 

SPECIFICATIONS
Working Voltage 10-16 Volts
Frequency Response 20Hz – 30KHz
Signal to Noise Ratio <85dB
Damping Factor 100dB<
Low Level Input 6V – 0.2V
ACT – Variable Crossover HP/BP/LP
Ch 1 /2 High Pass Filter Variable 20Hz – 8KHz
Ch 1 /2 Low Pass Filter Variable 50Hz – 8KHz
Ch 3/4 High Pass Filter Variable 20Hz – 8KHz
Ch 3/4 Low Pass Filter Variable 50Hz – 8KHz
Minimum working Impedance 2 Ohms
  • ACT – Adaptive Crossover Technology
  • High efficiency Class D Technology
  • Direct Connect Speaker Terminals
  • Dual 0 Gauge Power Wire Inputs
  • APC – Audio Protection Circuit
  • SESI – Signal Evaluation Status Indicator
  • Bass Remote with status indicator
  • CHM – Collective Heat Management
  • DRIVE-LINK- for easy multi-linking of two like amplifiers

Length (A) 17.87 in (200mm)
Width (B) 9.13 in (232mm)
Height (C) 2.53 in (64.5mm)

 

GENERAL SPECIFICATIONS
Rated Power @ 14.4 Volts
4 x 125 Watts @ 4Ω
4 x 250 Watts @ 2Ω
2 x 500 Watts @ 4Ω Bridged

 

SPECIFICATIONS
Working Voltage 10-16 Volts
Frequency Response 20Hz – 30KHz
Signal to Noise Ratio <85dB
Damping Factor 100dB<
Low Level Input 6V – 0.2V
ACT – Variable Crossover HP/BP/LP
Ch 1 /2 High Pass Filter Variable 20Hz – 8KHz
Ch 1 /2 Low Pass Filter Variable 50Hz – 8KHz
Ch 3/4 High Pass Filter Variable 20Hz – 8KHz
Ch 3/4 Low Pass Filter Variable 50Hz – 8KHz
Minimum working Impedance 2 Ohms