DB DRIVE A7 125.4 4 CHANNEL AMPLIFIER
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

DB DRIVE A7 125.4 4 CHANNEL AMPLIFIER

Add Your Review
Available: In Stock
  • Product SKU: G2D2354E
$699.99 $799.99

Image

The A7 4 Channel Amps are equipped with a Independent 18dB per Octave High Pass and Low Pass X-Over Network. The amps also feature a variable Bass Boost EQ is set at 45Hz.

  • 2Ω Stereo Capability
  • Continuously Variable Low level RCA Inputs
  • DRIVESINK  Heat Management System
  • Independent 18dB per Octave High Pass and Low Pass X-Over Network
  • Continuously Variable Bass Boost @ 45Hz
  • Internal Multi-Link Module For Easy Multi-Linking of Two Like Amplifiers
  • Unregulated DC-DC PWM Power Supply
  • Speaker Short Circuit Protection
  • RCA Pre-Amp Outputs for Easy Daisy Chaining of Multiple Amplifiers
  • Large Gauge Power Input Terminals

PHYSICAL STRUCTURE



Length (A) 16.63″ / (422mm)
Width (B) 10.25″ / (260mm)
Height (C) 2.20″ / (55.99mm)

 

 

GENERAL SPECIFICATIONS
Rated Power @ 14.4 Volts
Dynamic Power Handling 4 x 125 Watts @ 2Ω
Nominal Power Handling 4 x 250 W / 2 x 350 W @ 4Ω
PARAMETERS
Frequency Response 20Hz ~ 30KHz
S/N Ratio < 105 dB
Independent Selectable X-Over F/R HPF / LPF /LP-BP
Variable High Pass Filter 15Hz ~ 5Khz
Variable Low Pass Filter 50Hz ~ 5KHz
Damping Factor 200m<

The A7 4 Channel Amps are equipped with a Independent 18dB per Octave High Pass and Low Pass X-Over Network. The amps also feature a variable Bass Boost EQ is set at 45Hz.

  • 2Ω Stereo Capability
  • Continuously Variable Low level RCA Inputs
  • DRIVESINK  Heat Management System
  • Independent 18dB per Octave High Pass and Low Pass X-Over Network
  • Continuously Variable Bass Boost @ 45Hz
  • Internal Multi-Link Module For Easy Multi-Linking of Two Like Amplifiers
  • Unregulated DC-DC PWM Power Supply
  • Speaker Short Circuit Protection
  • RCA Pre-Amp Outputs for Easy Daisy Chaining of Multiple Amplifiers
  • Large Gauge Power Input Terminals

PHYSICAL STRUCTURE


Length (A) 16.63″ / (422mm)
Width (B) 10.25″ / (260mm)
Height (C) 2.20″ / (55.99mm)

 

 

GENERAL SPECIFICATIONS
Rated Power @ 14.4 Volts
Dynamic Power Handling 4 x 125 Watts @ 2Ω
Nominal Power Handling 4 x 250 W / 2 x 350 W @ 4Ω
PARAMETERS
Frequency Response 20Hz ~ 30KHz
S/N Ratio < 105 dB
Independent Selectable X-Over F/R HPF / LPF /LP-BP
Variable High Pass Filter 15Hz ~ 5Khz
Variable Low Pass Filter 50Hz ~ 5KHz
Damping Factor 200m<