Cerwin Vega Stroker Marine SRPM700.2 2-Channel Amplifier

Add Your Review

Available: In Stock

$319.99 ~~$349.99~~

Class-D Full Range 2-Ohm Stable] 2-Channel Marine Amplifier
RMS Power Rating:
- 4 ohms: 200 watts x 2 channel.
- 2 ohms: 350 watts x 2 channel.
- Bridged, 4 ohms: 700 watts x 1 chan.
Conformal coated PCB to protect against dust, vibration, and moisture
Top-mounted controls allow for fast, accurate adjustments
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
2 or Mono channel operation
Speaker-level (high-level) inputs
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity:
- Low level: 125mV-5V
Frequency Response: 10 – 33,000 Hz
Total Harmonic Distortion (THD): 0.05%
Signal to Noise Ratio: -77.2 dBA
Variable high-pass filter: 40 – 400 Hz, 24 dB/octave
Variable low-pass filter: 40 – 400 Hz, 24 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz

Specifications

RMS Power (2 Ω)	300 W x 2
RMS Power (4 Ω)	200 W x 2
Bridge (Mono 1 Ω)	N/A
Bridge (Mono 2 Ω)	N/A
Bridge (Mono 4 Ω)	700 W x 1 (4 Ω ONLY)
Type	Full-Range Class D
Power Supply	Full PWM
Idle Current	(0.7A)
S-N Rario (A weighted @ 1W)	-77.2dBA
S-N Rario (A weighted @ FP)	-98.9dBA
Sensitivity-Low Input Level	0.2mV – 10.0V
Sensitivity-High Input Level	YES
Input Impedance (Low Input Level)	22 KΩ
Input Impedance (AUX Input Level)
Output Impedance	0.047 Ω
Damping Factor (50Hz @ 4Ω)	>250
Bandwidth (-3dB)	10Hz-35KHz
Crossover (-12 dB/ Oct) – Varile High Pass	40Hz-400Hz
Crossover (-12 dB/ Oct) – Varile Low Pass	40Hz-400Hz
Crossover (-12 dB/ Oct) – Varile Sub-Sonic	N/A
Fuse Ratin(ATC)	N/A
Dimentions (Lenght x Width x Height (inches))	8.66″ x 5.28″ x 1.75″
Dimentions (Lenght x Width x Height (mm))	220 x 134 x 44.5

Class-D Full Range 2-Ohm Stable] 2-Channel Marine Amplifier
RMS Power Rating:
- 4 ohms: 200 watts x 2 channel.
- 2 ohms: 350 watts x 2 channel.
- Bridged, 4 ohms: 700 watts x 1 chan.
Conformal coated PCB to protect against dust, vibration, and moisture
Top-mounted controls allow for fast, accurate adjustments
Pulse Width Modulated MOSFET power supply
LED power (green) and protect (red) indicators
Soft start turn-on
2 or Mono channel operation
Speaker-level (high-level) inputs
Preamp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity:
- Low level: 125mV-5V
Frequency Response: 10 – 33,000 Hz
Total Harmonic Distortion (THD): 0.05%
Signal to Noise Ratio: -77.2 dBA
Variable high-pass filter: 40 – 400 Hz, 24 dB/octave
Variable low-pass filter: 40 – 400 Hz, 24 dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz

RMS Power (2 Ω)	300 W x 2
RMS Power (4 Ω)	200 W x 2
Bridge (Mono 1 Ω)	N/A
Bridge (Mono 2 Ω)	N/A
Bridge (Mono 4 Ω)	700 W x 1 (4 Ω ONLY)
Type	Full-Range Class D
Power Supply	Full PWM
Idle Current	(0.7A)
S-N Rario (A weighted @ 1W)	-77.2dBA
S-N Rario (A weighted @ FP)	-98.9dBA
Sensitivity-Low Input Level	0.2mV – 10.0V
Sensitivity-High Input Level	YES
Input Impedance (Low Input Level)	22 KΩ
Input Impedance (AUX Input Level)
Output Impedance	0.047 Ω
Damping Factor (50Hz @ 4Ω)	>250
Bandwidth (-3dB)	10Hz-35KHz
Crossover (-12 dB/ Oct) – Varile High Pass	40Hz-400Hz
Crossover (-12 dB/ Oct) – Varile Low Pass	40Hz-400Hz
Crossover (-12 dB/ Oct) – Varile Sub-Sonic	N/A
Fuse Ratin(ATC)	N/A
Dimentions (Lenght x Width x Height (inches))	8.66″ x 5.28″ x 1.75″
Dimentions (Lenght x Width x Height (mm))	220 x 134 x 44.5